Vinarack Tự Hào Cung Cấp Giá Kệ Chứa Hàng Nhà Kho Cty Hàng Đầu Việt Nam&Thế Giới Kệ Siêu Thị,Pallet Sắt,Sơn Tĩnh Điện Xe Đẩy Hàng Nhà Kho,Kệ Lưu Trữ Hồ Sơ,Kệ Sắt V Đa Năng Lắp Ghép

Effectively utilising floor and cubic space, Vinarack’s push back racking is amongst the most space and time efficient pallet storage system available.
Pallets are loaded in sequence onto wheeled carries of differing heights and are pushes back along inclined steel guide channels to utilise the full depth of the racking. Pallets can be stored up to four deep and when a load is retrieved the remaining pallets roll forward into position at the picking face. Selectivity is “First In – Last Out”/FILO and with each product having a dedicated lane, dynamic push back racking is particulary useful in marshalling areas and for bulk storage and handing.
+        A form of live storage where pallets are stored two, three or four deep. Pallets are loaded onto a trolley which pushes the other pallets back up a channel rail. When a pallet is retrieved the remaining ones will roll forward into position. Pallets are accessed from one side only
+        Quick easy access to all lines
+        Maximum use of floor space
+        Can store a variety of pallet types together
+        Suitable for bulk storage/cold store/chill store applications

Contact:
Vinarack JSC
No 3, 40 Street,Quarter 8,Hiep Binh Chanh Ward,Thu Duc District,HCMC
Hotline: 0909.787.797 – 0903.812.187
T/F: 0837.262.606
Email: Contact@vinarack.vn
Web: http://www.vinarack.vn
Forum: http://viban.vn
Blog: http://viban.org

Drive-In Vinarack

Drive-in/Drive-through systems provides maximum storage capacity using the minimum amount of space. It is particularly suited to store very large quantities of homogeneous products. Drive -In or Double Access Systems consists of continuous lanes of racking with only a single load and retrieval aisle. Loading and unloading is undertaken by means of counter balance or reach trucks that drive down each lane into the racks.
Drive -In racking operates on the basis First In – Last Out (FILO), therefore it only suits product, which is stored in sufficient volume to require multiple lanes to ensure stock rotation.
When operating Drive-Through racking, access aisle are positioned on either face of the Drive Block. Drive-Through racking of fers the advantage that picking and replenishment can take place independently of each other, allowing First In – First Out (FIFO) principals to be operated.
Facts about Drive-In/ Drive-Through Pallet Racking Systems :
+ Limited stock rotation
+ Limited order picking 20-30% selectivity
+ Slow picking rate
+ Good product protection
Average floor area utilization 60% net pallet area usage of overall warehouse area
Pallet redundancy can run as high as 30% if a wide range of different products are stored with the system
This system is suited for manufacturers of products produced in batch, or in warehouse operations where there are limited products types and pallets cannot be safely blocked stacked
Mechanical Handling Equipment: Counter Balance/ Reach Truck .

Contact:
Bao Chanh JSC
No 3, 40 Street,Quarter 8,Hiep Binh Chanh Ward,Thu Duc District, Ho Chi Minh City
Hotline: 0909.787.797 – 0903.812.187
T/F: 0837.262.606
Email: Contact@vinarack.vn
Web:  http://www.vinarack.vn
Forum: http://www.viban.vn
Blog:  http://wwww.viban.org

A derivative to the Selective pallet racking, the Double Deep system requires the use of a specialist reach truck or an attachment fitted to reach truck. Whilst achieving increases in capacity of up to 30% above the former, only 50% of the pallets are immediately accessible.

This system however provides an excellent method of increasing warehouse capacity or when alternative systems such as the Drive-In which require high numbers of homogenous pallet types, are not possible.

Facts about Double Deep Pallet Racking System
+ Lower beam level required for some types of equipment
+ Operates up to height of 10m
+ Average stock rotation
+ Average order picking, 50% selectivity
+ Average Floor area utilization
+ 40% net pallet area usage of overall warehouse area
+ Redundancy rates can run between 10-20% dependant on the quality of the WMS programme
+ Popular against Drive-in Racking, as a lower cost alternative which increase capacity over selective by up to 30%.
+ Recommend the use of pallet rails or pallet support bars above 4m, to increase MH productivity and improve safety of the operation.
+ Recommend to use column protectors when using MH equipment that requires the straddle leg to go below bottom beam or between pallets and upright.
+ Mechanical Handling Equipment

Specialist machine with either pantograph or telescopic forks, or using a purpose designed attachment, which can be fitted to standard reach trucks.
Mọi chi tiết xin vui lòng liên hệ :
Công Ty CP Bảo Chánh
No 3, 40 Street, Quarter 8, Hiep Binh Chanh Ward, Thu Duc District, Ho Chi Minh City
Hotline: 0909.787.797 – 0903.812.187
T/F: 0837.262.606
Email: Contact@vinarack.vn
Web: http://www.vinarack.vn
Forum: http://viban.vn
Blog: http://viban.org

Commonly known as adjustable pallet racking, this is the perhaps the most popular and economical form of pallet racking providing safe 100% selective storage up to 11m in height, fully utilizing valuable air space.
Vinarack pallet racking can be designed to meet virtually any pallet size or weight and can be used in conjunction with all types of lift trucks. A wide range of accessories is available to accommodate non-standard loads Xem tiếp >>